Plumbing, Heating & Ventilation
1" x 3/4", White, Reducing Slip x Thread, Female Adapter, Pipe Threads Are Inside To Allow Connecting Of Male Pipe Threads, Used In Sprinkler & Irrigation Systems, Meets The Requirements Of ASTM D 2466.
3/4" x 1/2", White, Slip x Male Thread, Male Reducing Adapter, Used To Reduce The Size Of A Pipe While Providing A Threaded End, Used In Sprinkler & Irrigation Systems, Meets The Requirements Of ASTM D 2466.
1" x 3/4" White Male Adapter Reducing, Slip x Male Thread, Used To Reduce The Size Of A Pipe While Providing A Threaded End, Used In Sprinkler & Irrigation Systems, Meets The Requirements Of ASTM D 2466.
3/4" x 1", White, Slip x Male Thread, Male Reducing Adapter, Used To Reduce The Size Of A Pipe While Providing A Threaded End, Used In Sprinkler & Irrigation Systems, Meets The Requirements Of ASTM D 2466.
3/4" x 1/2" White Reducer Bushing, Male Thread x Female Thread, Used To Reduce The Size Of A Pipe, Used In Sprinkler & Irrigation Systems, Meets The Requirements Of ASTM D 2466.
24", Galvanized Duct, For Standard 3-1/4" x 10" Duct, Use For Range Hood Venting, Easy 1 Piece Snap Design.
4" Spring Tension Clamp, Holds 4" Ducting Hose On Hoods & Dryers, Clamps Easily Without Tools, 2 Per Poly Bag.
1" x 3/4" White Reducer Bushing, Male Thread x Female Thread, Used To Reduce The Size Of A Pipe, Used In Sprinkler & Irrigation Systems, Meets The Requirements Of ASTM D 2466.
3" Toe Saver Floor Plug, White, Eliminates Tripping Hazard Posed By Conventional Raised Head Plugs, Interchanges With Brass Plugs In Metal Applications.
1-1/4" x 3/4" White Reducer Bushing, Male Thread x Female Thread, Used To Reduce The Size Of A Pipe, Used In Sprinkler & Irrigation Systems, Meets The Requirements Of ASTM D 2466.
1/4" x 4", Master Flash Roof Flashing, Slides Over Pipe, For Pitch To 40 Degree, Uses Silicone Sealant Between Base & Surface, Easily Secures To Roof With Sheet Screws, Molds To Metal, Plastic, Etc, & Has A Non Fading EPDM Collar, Rated 200 Degrees Fahrenheit Continuous Heat, Iapmo/UPC Listed.
3/4" Housing O Ring, Use With Model #HF-150A True Value #529-096 Or Model #HF-360 True Value #583-328.
1/2" (5/8" Outer Diameter) CPVC Compression Repair Coupling, CPVC Body & Nuts With Rubber Gaskets, Rated At 100 PSI At Temperatures Up To 180 Degrees Fahrenheit, Tubing Sizes For Use In Any Piping Application On Copper Or Plastic Pipe.
3/4" (7/8" Outer Diameter) CPVC Compression Repair Coupling, CPVC Body & Nuts With Rubber Gaskets, Rated At 100 PSI At Temperatures Up To 180 Degrees Fahrenheit, Tubing Sizes For Use In Any Piping Application On Copper Or Plastic Pipe.